Single touch payroll (STP) is how Australian employers report each employee's pay, PAYG withholding and super information to the Australian Taxation Office (ATO), straight from their payroll software, every time they pay. Reports are due on or before payday, the year is finalised by 14 July, and since 1 July 2026 every STP report also has to carry each employee's year-to-date qualifying earnings and super liability under Payday Super.
This guide explains what STP is, who has to report, what Phase 2 and Payday Super changed, how to fix mistakes, and what to check in your payroll software. Everything here comes from the ATO's own guidance as it stood in late October 2026. Rules change, so confirm the detail on ato.gov.au or with your registered tax agent or BAS agent before you act on it.
What is single touch payroll?
Single touch payroll STP is a reporting system that requires employers to send payroll and superannuation information to the ATO; it is not a payment system. Each time you run a pay run, your STP enabled payroll software sends the ATO a pay event for every employee you paid: gross pay broken into its components, PAYG withholding, super information and the year-to-date totals. Wages still go to employees and super still goes to funds the usual way; STP just tells the government what happened.
When you report payroll data, the ATO uses it in three main ways. Employees see their year-to-date pay in myGov and, once you finalise, an income statement that replaces the old payment summary (and the group certificates before that, for anyone who remembers them). The ATO shares the data with Services Australia so payments such as income support reflect what people actually earn. And since Payday Super, the ATO uses STP data to check that each employee's super arrived on time.
For employers, the point is that payroll reporting now happens continuously. There is no payment summary annual report to prepare at the end of the financial year, which has cut the reporting burden and the administrative burden at year end for most small employers. But there is also nowhere to hide a payroll error until June.
Is single touch payroll a legal requirement?
Yes. STP reporting became compulsory on 1 July 2018 for employers with 20 or more employees and on 1 July 2019 for employers with 19 or fewer. Today it applies to every employer, from sole traders with one staff member to large employers, whatever the business size, unless the ATO has granted a deferral or an exemption.
The exemptions are narrow. Employers who hold a withholding payer number (WPN) rather than an Australian business number are exempt until 30 June 2033 without applying. Anyone else needs exceptional or unforeseen circumstances, such as a natural disaster or serious illness. Exempt employers still give payment summaries and lodge a payment summary annual report.
There are also concessions that change how often you report, not whether you report:
- Micro employers. Businesses with one to four employees (not counting closely held payees) can report quarterly through a registered tax agent or BAS agent, if they meet the ATO's criteria.
- Closely held payees. Employers with 19 or fewer payees can report closely held payees, such as family members, quarterly.
- Deferrals. New employers can get up to three months to start reporting, and the ATO grants other deferrals case by case. You can apply through Online services or by phone.
How do you report STP each pay run?
The rule is simple: report on or before payday. Payday is the date in the bank transaction, or the date you intend to pay. A typical pay cycle looks like this:
- Process payroll. Your payroll software calculates gross pay, PAYG withholding, super and any deductions for the pay run.
- Review before you submit. Someone checks the pay run and the STP data before lodging. This is where payroll accuracy is cheapest to protect, and where most errors are cheapest to fix.
- Lodge the pay event. The software sends the STP report to the ATO, either directly or through a sending service. The ATO acknowledges receipt.
- Pay employees. Net wages go out on payday as usual.
- Pay super. Under Payday Super, super for that payday now has to reach the employee's fund within days, not by the end of the quarter.
Because every pay event carries year-to-date figures, a correct report quietly fixes the totals that came before it. That is also why an error in the year-to-date figures keeps repeating until someone corrects it.
What is the difference between STP Phase 1 and STP Phase 2?
Phase 1 reported the basics: gross pay, PAYG withholding and super. Phase 2, which the ATO calls expanding STP, asks for far more detail so other government agencies can use the data without asking employers for separate reports. The main additions:
- Gross broken into components. Gross, paid leave, allowances, overtime, bonuses and commissions, directors' fees, Lump sum W and salary sacrifice are reported separately.
- Income types. Each payment is tagged as an income type, such as salary and wages, working holiday makers, foreign employment income or closely held payees. Some income types, such as foreign employment income, need country codes, and you can't report "not applicable".
- Employment basis and tax treatment codes. Each employee carries an employment basis (full-time, part-time, casual and so on) and a six-character tax treatment code that describes how their PAYG withholding is worked out.
- Cessation reasons. When someone leaves, you report why, using the ATO's cessation codes, along with any termination payments.
- Child support. Child support deductions and garnishees can be reported through STP, which is optional; the payments still go to Services Australia.
- Less paperwork. Employers no longer send TFN declarations to the ATO.
The ATO's current guidance simply calls these the STP employer reporting guidelines. If your payroll software is current and listed on the ATO's product register, it should be reporting this way already. If you still see "Phase 1" anywhere in your software, ask your provider why.
What changed in STP from 1 July 2026 with Payday Super?
This is the change most employers have not caught up with. For paydays from 1 July 2026, the ATO's STP reporting under Payday Super guidance says every STP report must include, for each employee:
- Year-to-date qualifying earnings. Qualifying earnings are the payments used to calculate super guarantee. They include ordinary time earnings, and also amounts such as salary-sacrificed pay, commissions and some contractor payments. Fringe benefits and expense reimbursements are not qualifying earnings.
- Year-to-date super liability. The super guarantee you owe for that employee, reported each payday. Reporting it is now mandatory.
There is a transition. Until 30 June 2027 the ATO still accepts ordinary time earnings in place of qualifying earnings, but once you start reporting qualifying earnings it no longer accepts ordinary time earnings. From 1 July 2027, reports that leave out either qualifying earnings or super liability will be rejected, and penalties may apply. The ATO also says that if a field has no amount, you report zero rather than leaving it blank.
Why it matters: the ATO now works out each payday's qualifying earnings from the change in the year-to-date figure, applies the super guarantee rate (12% for 2026–27), and compares the result with what super funds report receiving. Your STP report has become the yardstick your super payments are measured against. For 2026–27 the maximum contribution base is $270,830 for the year, and once an employee reaches it you keep reporting the capped amount.
If your payroll software doesn't report qualifying earnings yet, the ATO's advice is to keep good super guarantee records for each payday and ask your software provider when it will. Our article on payroll compliance in Australia covers the wider Payday Super obligations.
Not Sure If Odoo is Right For Your Business?
If payroll, super and your accounts live in separate systems, we'll show you what reporting from one system looks like, and whether it suits your business.
How do you correct an STP report?
Mistakes happen, and the ATO expects you to fix them promptly rather than perfectly the first time. Correct an error within 14 days of finding it, or in the next pay event if that is later. Errors from a previous financial year need correcting by 14 July after the year ends, and finalised data can be amended for up to five years.
Your software will offer two tools, and they are not interchangeable:
- Update event. Corrects year-to-date figures or finalises data without making a payment. Use it when no one is being paid, never alongside a pay run.
- Full file replacement. Replaces the most recent pay event when it was lodged in error or contained significantly corrupt data. You can lodge only one in any 24 hours, and it isn't meant for routine corrections.
Lodging a pay event when an update event was needed is one of the errors the ATO lists, because it can create duplicate pay records.
When is STP finalisation due?
You must make a finalisation declaration by 14 July after the end of the financial year. Finalising tells the ATO that each employee's data for the year is complete, and it changes their income statement in myGov to "tax ready". Employees should wait for that status before lodging their tax returns, and if it hasn't appeared by the end of July, they'll be asking you why.
Closely held payees reported under the quarterly concession have a later finalisation date. Check the ATO's concessional reporting rules if that applies to you.
What are the most common STP mistakes?
The ATO publishes the reporting errors it sees most often, and incorrect information in one pay run tends to repeat in every pay run after it. The ones we'd check first in any payroll file:
- Pay items marked "not reportable" when they are. A pay code set up wrongly years ago keeps under-reporting every pay run.
- Year-to-date amounts not carried over. Usually after a mid-year change of payroll software or payroll ID, which can leave employees with duplicate records and income statements that never become tax ready.
- Missing cessation dates or reasons. The employee left, but STP says they still work for you.
- Allowances in the wrong place. Amounts reported as "other allowances" that belong elsewhere, or all-purpose allowances not reported separately.
- "na" for not applicable. In a country code field, NA means Namibia.
- Salary sacrifice confused with reportable employer super contributions. They are reported differently.
A newer one to watch: award transport payments lose their nil-withholding treatment from 1 October 2026 and have to be reclassified in STP during 2026–27. If your award interpretation sits in a separate tool, make sure the change flows through. Our guide to award interpretation software explains why that link breaks so often.
What happens if you don't report through STP?
The ATO's failure to lodge on time penalty covers STP reports. It is one penalty unit for each 28 days a report is late, up to five units, and the amount is multiplied for medium and large withholders. The ATO also says it may apply penalties where employers repeatedly miss reports, and in 2026 it consulted on new draft guidance about how it treats employers who don't comply with STP reporting.
The bigger cost is usually indirect. Missing or wrong STP data now feeds straight into the ATO's Payday Super checks, which test your superannuation obligations as well as your tax obligations, so a reporting gap can look like a super shortfall, and super shortfalls are where the serious charges sit.
How do you choose STP enabled payroll software?
Almost every Australian payroll product is STP enabled software, so the useful questions are about how well it fits the rest of your business. The ATO keeps a product register of software that can report to it, and says it doesn't recommend or endorse any of them. When you compare STP software, ask:
- Does it report year-to-date qualifying earnings and super liability today? If the answer is "later this year", ask for a date in writing.
- Does it handle your award? Penalty rates, overtime and allowances need to land in the right STP categories automatically.
- How does it fix mistakes? Look for clear update events, full file replacement and a review step before every lodgement.
- Where does the payroll data go next? If wages, leave and super liabilities have to be re-keyed or synced into your accounts, you have created a reconciliation job every pay run.
- Who supports it in Australia? STP compliance requirements change every year. Someone needs to own those changes.
Does Xero use single touch payroll?
Yes. Xero, MYOB and the other mainstream Australian accounting and payroll products all report through STP. The differences that matter to Australian businesses are in award handling, Payday Super readiness and how payroll connects to the rest of your payroll processes and your accounts, not in whether STP is available.
Is Odoo payroll STP compliant?
Odoo's own Australian payroll documentation for versions 19 and 20 states that "Odoo is compliant with SuperStream and Single Touch Payroll Phase 2" (checked 28 October 2026). The same documentation lists scenarios Odoo does not yet cover, including foreign employment income, the actors and performers tax treatment, death benefits reporting and WPN-based reporting, so check those against your workforce first. Payday Super changed STP reporting on 1 July 2026, so also confirm with Odoo, or your implementation partner, how the release you will run reports qualifying earnings and super liability.
Where Odoo helps is the part STP doesn't cover. Payroll, timesheets, leave, accounting and the general ledger sit in one system, so wages, PAYG withholding and super liabilities post to the accounts as the pay run is validated, without an export. We are moving our own payroll onto Odoo for exactly that reason. Our guide to Odoo payroll in Australia covers what it includes and when it is the wrong tool, and our Odoo payroll page shows how we set it up for Australian employers.
Why take this advice from WAO?
We are an accounting-led Odoo partner: two accountants started WAO, and the accounts are the lens we bring to every module we implement, from payroll and inventory to manufacturing, eCommerce and projects. We were the winner of the Odoo Customer Choice Award (ANZ) 2026, and the Odoo partner directory lists 60+ client references, 10+ certified Odoo experts and 95%+ client satisfaction. This article is general information, not professional advice; for further information on your situation, take it to your registered tax agent or BAS agent.
Frequently asked questions
Single touch payroll is the way Australian employers report each employee's payroll information, including pay, PAYG withholding and super, to the ATO from their payroll software, every time they pay their employees.
Yes, unless the ATO has granted a deferral or exemption. Employers with a withholding payer number are exempt until 30 June 2033, and micro employers and closely held payees have quarterly reporting concessions.
On 1 July 2018 for employers with 20 or more employees, and on 1 July 2019 for employers with 19 or fewer.
On or before each payday. The finalisation declaration for the year is due by 14 July after the financial year ends.
Within 14 days of finding the error, or in the next regular pay event. Use an update event to correct year-to-date figures without a payment, and a full file replacement only if the latest pay event was lodged in error or corrupted.
From 1 July 2026 every STP report must include each employee's year-to-date qualifying earnings and super liability. From 1 July 2027 the ATO will reject reports without them.
Your payroll software shows each lodgement and the ATO's response. Employees can see their year-to-date figures in myGov, and your registered tax agent or BAS agent can check what the ATO has received.
The information and tips shared on this blog are meant to be used as learning and personal development tools as you launch, run and grow your business. While a good place to start, these articles should not take the place of personalised advice from professionals. As our lawyers would say: “All content on WAO’s blog is intended for informational purposes only. It should not be considered legal or financial advice.” Additionally, WAO is the legal copyright holder of all materials on the blog, and others cannot re-use or publish it without our written consent.


